국가균형발전 시대를 열어가는 국민의 대학Leap forward, PNU!
  • HOME
  • > PUBLICATION
  • > Journal

Journal

/WEB-INF/jsp/k2web/com/cop/site/layout.jsp
shipres_sub

연구논문 발표 실적 (Publications)

국내학술지 (Domestic Journals)

  1. 이 인원, 성 형진, 2000, 후향계단 주위의 난류 박리재부착유동에서의 벽압력변동의 통계적 특징, 대한기계학회논문집 B권, 
    2. 제24권 제2호, pp.280-287, ISSN : 1226-4881 (2000.2.1)
  2. 이 인섭, 이 인원, 2002, 마이크로 유동의 정량적 가시화, 기계저널, vol. 42, no. 5, pp.50-53, ISSN : 1226-7287 (2002.5.1)
  3. 안 승광, 이 인원, 성 형진, 2002, 후향계단 난류 박리재부착 유동에서의 대형와의 구조, 대한기계학회논문집 B권, 제26권 제12호, 
    4. pp.1674-1680, ISSN : 1226-4881 (2002.12.1)
  4. 이 인섭, 성 재용, 이 인원, 2003, BioMEMS 에 적용되는 미소유체역학의 가시화기법, 기계저널, vol. 43, no. 2, pp.38-42, 
    5. ISSN : 1226-7287 (2003.2.1)
  5. 이 인섭, 이 인원, 2003, 미소유동의 정량적 가시화 방법의 최근 연구동향, 한국가시화정보학회지, vol. 1, no. 1, pp.22-27, 
    6. ISSN : 1598-8430 (2003.6.1)
  6. 김 경천, 오 성진, 이 인원, 2005, 국한 충돌 슬롯 제트의 비정상 거동에 대한 실험적 연구, 한국가시화정보학회지, vol. 3, no. 2, 
    7. pp.57-62, ISSN : 1598-8430 (2005.12.1)
  7. 박현, 박진환, 하효민, 전호환, 이인원, 2006, 유동 전단응력에 의한 선박 유기도막의 열화거동 연구, 해양환경안전학회지, vol.12, 
    8. no. 1, pp.9-14, ISSN : 1229-3431 (2006.3.31)    
  8. 박현, 박진환, 하효민, 전호환, 이인원, 2006, 전단유동 하에서의 선박용 방식도막의 전기화학 특성, 대한조선학회 논문집, vol.43, 
    9. no. 2, pp.268-274, ISSN : 1225-1143 (2006.4.1)
  9. Victor M. Kulik, 정광효, 전호환, 이인원, 2006, 점탄성 유동 벽면의 파동 감쇠 특성 해석, 대한기계학회 논문집 B권, 제30권 12호, 
    10. pp. 1155-1163, ISSN : 1226-4881 (2006.12.1)
  10. 문경만, 조황래, 이명훈, 김현명, 이인원, 전호환, 2007, 중방식 도료의 내식성에 미치는 첨가제의 영향, 한국해양공학회지, 
    11. 제21권 3호, pp. 65-70, ISSN : 1225-0767 (2007.6.1)
  11. 바셀 서우디, 안드레이 보이코, 전호환, 이인원, 2008, 유연벽면 점탄성 소재의 광대역 동특성 계측 기법, 대한조선학회 논문집, 
    12. vol.45, no. 1, pp.73-80, ISSN : 1225-1143 (2008.2.20)
  12. 안남현, 이인원, 2008, POD 기법을 이용한 저 레이놀즈 수 국한 충돌 제트의 비정상 거동 연구, 한국가시화정보학회지, vol. 6, 
    13. no. 1, pp.34-40, ISSN : 1598-8430 (2008. 6. 1)
  13. 안남현, 전호환, 이인원, 2008, 외부경계층 수직 날의 저항저감효과에 대한 실험적 연구, 대한조선학회 논문집, vol.45, no. 5, 
    14. pp.487-494, ISSN : 1225-1143 (2008.10.20)
  14. 성찬경, 최미선, 전호환, 이인원, 박현, 이창훈, 2008, 생태독성검정을 위한 고랑따개비(Balamus albicostatus) 초기유생의 
    15. 중금속에 대한 민감도 분석, 환경독성학회지, vol.23, no.4, pp.337-343, ISSN : 1226-9158
  15. 이인원, 안남현, 2009, 점탄성 재료의 복소수 동특성 측정방법, 대한기계학회논문집 A권, vol. 33, no. 5, pp.489-495, 
    16. ISSN : 1226-4873 (2009.5.1)
  16. 이인원, 안남현, 2009, 유연벽면 점탄성 소재 배합비와 저항저감 효과의 상관관계, 대한기계학회논문집 B권, vol. 33, no. 6, 
    17. pp.389-395, ISSN : 1226-4881 (2009.6.1)
  17. 최희종, 전호환, 윤현식, 이인원, 박동우, 김동진, 2009, 선미부에 유동제어판을 부착한 선박에 대한 포텐셜 유동해석, 
    18. 대한조선학회논문집, vol. 46, no. 6, pp.587-594, ISSN : 1225-1143 (2009.12.20)
  18. 장호윤, 박충환, 김헌우, 이병성, 이인원, 2010, 30ft급 쌍동형 세일링 요트의 선체 유체력 계측에 의한 세일력 추정방법에 관한 
    19. 연구,  대한조선학회논문집, vol. 47, no. 4, pp.477-483, ISSN : 1225-1143 (2010.8.20)
  19. 김필근, 박맹언, 이인원, 전호환, 박현, 2010, 방오도료 용출수의 조피볼락과 알테미아에 대한 급성독성 평가, 해양환경안전학회지, 
    20. vol. 16, no. 4, pp.361-367, ISSN : 1229-3431 (2010.12.31)
  20. 박현, 안남현, 박성현, 전호환, 이인원, 2011, 경계층 외부 수직날의 마찰저항 저감 기구에 대한 PIV 관측, 한국가시화정보학회지, 
    21. vol. 9, no. 1, pp.20-28, ISSN : 1598-8430 (2011. 3. 31)
  21. 안남현, 박성현, 전호환, 이인원, 2013, POD 기법을 이용한 경계층 외부 수직날의 마찰저항 저감 기구에 대한 관측, 
    22. 대한기계학회논문집 B권, vol. 37, no. 6, pp.567-575, ISSN : 1226-4881 (2013. 6. 1)
  22. 박현, 전호환, 이인원, 2013, 화상 분석을 통한 선박 방오도료의 성능 평가, 한국가시화정보학회지, vol. 11, no. 2, pp. 18-26, 
    23. ISSN : 1598-8430 (2013. 9. 1)
  23. 이인원, 박성현, 전호환, 황아롬, 안남현, 2013, 스테레오 시간분해 입자영상유속계를 이용한 외부경계층 수직날 배열에 의한 
    24. 마찰저항 저감 기구에 관한 실험적 조사, 한국동력기계공학회지, vol. 17, no. 6, pp.96-102, ISSN : 1226-7813 (2013. 12. 1)
  24. 정성우, 김은영, 전호환, 박현, 이인원, 2014, 마찰저항 저감을 위한 고분자 수지 합성 및 PIV 유동장 계측. 한국가시화정보학회지, 
    25. vol. 12, no. 1, pp. 49-53, ISSN : 1598-8430 (2014. 4. 1)
  25. 서형석, 장호윤, 이인원, 최홍섭, 2015, 해양레저 분야 복합소재 적용 연구 소개 : 33피트급 아메리카스컵 훈련용 CFRP 세일링 요트 
    26. 개발, Composites Research, vol. 28, no. 1, pp. 15-21, ISSN : 2288-2103 (2015. 2. 1)
  26. 박성현, 이인원, 2016, 공기윤활평판실험에서 디지털 영상분석을 통한 윤활공기막 검출기법, 한국가시화정보학회지, vol. 14, 
    27. no. 1,  pp. 49-53, ISSN : 1598-8430 (2016. 4. 30)
  27. 양정우, 박현, 이인원, 2017, 상사축척법에 기반한 저마찰 선박 방오도료의 실선 마찰저항 저감성능 추정, 대한조선학회논문집, 
    28. vol. 54, no. 1, pp. 71-81, ISSN : 1225-1143 (2017. 1. 31)
  28. 이철민, 이인원, 백광준, 2017, 유체 격자 시스템에 따른 유체-구조 연성 결과 분석 및 검증, 한국마린엔지니어링학회지, vol. 41, 
    29. no. 6, pp.514-522, ISSN: 2234-7925 (2017. 7. 1)
  29. 호산나 우위톤즈, 이인원, 2017, 위핑 유동 조건에서의 직사각형 체 주위 유동의 수력학적 분석, 한국가시화정보학회지, vol. 15, 
    30. no. 3, pp.34-40, ISSN : 1598-8430 (2017. 12. 1)
  30. 양정우, 박현, 이인원, 2017, 중형 컨테이너선의 연료절감형 비틀림 타 개발, 대한조선학회문집, vol. 55, no. 2, pp. 169-177, 
    31. ISSN : 1225-1143 (2018. 3. 31)
  31. 이성훈, 이인원, 2018, 모형선 시험을 통한 외부경계층 수직 날 배열의 저항저감효과 검증, 한국가시화정보학회지, submitted, 
    32. ISSN : 1598-8430
  32. 박승찬, 이인원, 2020, 공기윤활선 모사 실험에서의 공극률 및 마찰저항저감율 상관성 분석을 위한 실험적 연구, 한국가시화정보학회지, 
    33. vol. 18, no. 1, pp.11-17, ISSN: 1598-8430 (2020. 4. 30)
  33. 이민경, 김수진, 유진원, 이인원, 2021, 차세대 한국형 어선의 저항성능 최적화를 위한 수조모형시험 연구, 대한조선학회논문집, vol. 58, 
       no. 1, pp. 32-39, ISSN: 1225-1143 (2021. 2. 20)

 

 

국제학술지 (International Journals)

  1. Lee, I. and Sung, H. J., 1999, Development of an array of pressure sensors with PVDF film, Experiments in Fluids, vol.26, 
    2. no. 1, pp.27-35, ISSN : 0723-4864, Impact factor : 0.821 (SCI), (1999.1.8)
  2. Chun, S. J., Lee, I. and Sung, H. J., 1999, Effect of spanwise-varying local forcing on turbulent separated flow over a 
    3. backward-facing step, Experiments in Fluids, vol.26, no.5, pp.437-440, ISSN : 0723-4864, Impact factor : 0.821 (SCI), 
    (1999.4.1)
  3. Lee, I. and Sung, H. J., 2001, Characteristics of wall pressure fluctuations in separated flows over a backward-facing 
    4. step: Part I. Time-mean and cross-spectral analyses, Experiments in Fluids, vol.30, no. 3, pp.262-272, ISSN : 0723-4864, 
    Impact factor : 0.821 (SCI), (2001.3.5)
  4. Lee, I. and Sung, H. J., 2001, Characteristics of wall pressure fluctuations in separated flows over a backward-facing 
    5. step: Part II. Unsteady wavelet analyses, Experiments in Fluids, vol.30, no. 3, pp.273-282, ISSN : 0723-4864, 
    Impact factor : 0.821 (SCI), (2001.3.5)
  5. Park, S. H., Lee, I. and Sung, H. J., 2001, Effect of local forcing on a turbulent boundary layer, Experiments in Fluids, 
    6. vol.31, no. 4, pp.384-393, ISSN : 0723-4864 (SCI), Impact factor : 0.821 (2001.9.26)
  6. Lee, I. and Sung, H. J., 2002, Multiple-Arrayed Pressure Measurement for Investigation of the Unsteady Flow Structure 
    7. of a Reattaching Shear Layer, Journal of Fluid Mechanics, vol. 463, pp.377-402, ISSN : 0022-1120, 
    Impact factor : 1.921 (SCI), (2002.7.25)
  7. Lee, I., Ahn, S. K. and Sung, H. J., 2004, Three-dimensional coherent structure in a separated and reattaching flow 
    8. over a backward-facing step, Experiments in Fluids, vol.36, no. 3, pp.373-383, ISSN : 0723-4864, 
    Impact factor : 0.851 (SCI), (2004.3.1)
  8. Suh, S-B., Boiko, A. V., Lee, I. and Chun, H. H., 2005, The Response of Three-dimensional Boundary Layer over a 
    9. Swept-wing to a Free Stream Axial Vortex, Journal of Ocean Science and Technology, vol. 2, no. 1, pp.50-58, 
    ISSN : 1738-2254, (2005.3.1)
  9. Kulik, V. M., Rodyakin, S. V., Lee, I. and Chun, H. H., 2005, Deformation of a viscoelastic coating under the action of 
    10. convective pressure fluctuations, Experiments in Fluids, vol. 38, no. 5, pp.648-655, ISSN : 0723-4864, 
    Impact factor : 1.062 (SCI), (2005.5.1)
  10. Boiko, A. V., Chun, H. H., Litvinenko, M. V., Kozlov, V. V., Cherednichenko, E. E. and Lee, I., 2005, Longitudinal 
    11. Structures in Plane Jets, Doklady Physics, vol. 50, no. 7, pp. 377-379, ISSN : 1028-3358, Impact factor : 0.283 (SCI), 
    (2005.7.1)
  11. Kulik, V. M., Rodyakin, S. V., Suh, S-B., Lee, I. and Chun, H. H., 2005, The response of compliant coating to 
    12. non-stationary disturbances, Physics of Fluids, vol. 17, no. 8, 088104, ISSN : 1070-6631, Impact factor : 1.728 (SCI), 
    (2005.8.1)
  12. Lee, I., Chun, H. H. and Kim, J., 2006, The transient response characteristics of compliant coating to pressure 
    13. fluctuations, Journal of Mechanical Science and Technology, vol. 20, no. 4, pp.533-544, ISSN : 1738-494X, 
    Impact factor : 0.183 (SCIE), (2006.4.1)
  13. Kim, K. C., Yoon, S. Y., Kim, S. M., Chun, H. H. and Lee, I. , 2006, An orthogonal-plane PIV technique for the 
    14. investigations of three-dimensional vortical structures in a turbulent boundary layer flow, Experiments in Fluids, vol. 40, 

    no. 6, pp.876-883, ISSN : 0723-4864, Impact factor : 1.112 (SCI), (2006.6.1)

  14. Boiko, A. V., Jung, K. H., Chun, H. H. and Lee, I., 2007, Effects of riblets on the streaky structures excited by free stream 
    15. tip vortices in boundary layer, Journal of Mechanical Science and Technology, vol. 21, no. 1, pp.196-206, 

    ISSN : 1738-494X, Impact factor : 0.215 (SCIE), (2007. 1. 1)

  15. Chernoray, V. G., Kozlov, V. V., Lee, I. and Chun, H. H., 2007, Influence of an unfavourable pressure gradient on the 
    16. breakdown of boundary layer streaks, Journal of Visualization, vol. 10, no. 2, pp.217-225, ISSN : 1343-8875, 

    Impact factor : 0.867 (SCIE), (2007. 4. 1)

  16. Kim, C. H., Lim, H.-O., Chung, I., Lee, I., Chun, H. H. and Jo, N.-J., 2007, Actuation behavior of waterbourne polyurethane/
    17. conductive filler nanocomposite electrode, Composite Interfaces, vol. 14, no. 5-6, pp.477-491, ISSN : 0927-6440, 

    Impact factor : 0.911 (SCI), (2007. 6. 1)

  17. Kim, K. C., Min, Y. U., Oh, S. J., An, N. H., Seoudi, B., Chun, H. H. and Lee, I., 2007, Time-resolved PIV Investigation on 
    18. the Unsteadiness of a Low Reynolds Number Confined Impinging Jet, Journal of Visualization, vol. 10, no. 4, 

    pp.367-379, ISSN : 1343-8875, Impact factor : 0.867 (SCIE), (2007. 10. 23)

  18. Seoudi, B., Kim, S. H., Chun, H. H. and Lee, I., 2008, Numerical estimation of dynamic behavior of viscoelastic elastomer 
    19. specimen, Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1140-1148, ISSN : 1738-494X, 

    Impact factor : 0.258 (SCIE), (2008. 6. 1)

  19. Kulik, V. M., Lee, I. and Chun, H. H., 2008, Wave properties of coating for skin friction reduction, Physics of Fluids, 
    20. vol. 20,  no. 7, pp. 075109 1-10, ISSN : 1070-6631, Impact factor : 1.738 (SCI), (2008. 7. 1)
  20. An, Y-H., Seo, P-S., Park, H., Lee, I., Chun, H. H. and Jo, N-J., 2009, Improvement in Weatherability of Transparent 
    21. Plastics by Sol-Gel Coating with UV Absorber and HALS, Journal of Polymer Engineering, vol.29, no. 1, pp.51-62, 

    ISSN : 0334-6447, Impact factor : 0.486 (SCIE), (2009.3.1)

  21. Seoudi, B., Kulik, V. M., Boiko, A. V., Chun, H. H. and Lee, I., 2009, New approach to the computation of the form factor 
    22. of viscoelastic cylinders, Mechanics of Materials, vol.41, no. 5, pp.495-505, ISSN : 0167-6636, Impact factor : 2.206 

    (SCI), (2009.5.1)

  22. Kulik, V. M., Semenov, B. N., Boiko, A. V., Seoudi, B., Chun, H. H. and Lee, I., 2009, Measurement of dynamic properties 
    23. of viscoelastic materials, Experimental Mechanics, vol.49, no. 3, pp.417-425, ISSN : 0014-4851, 

    Impact factor : 1.542 (SCI), (2009.6. 9)

  23. Lee, W.-K., Song, J.-M., Park, H., Lee, I., Chun, H. H. and Jo, N.-J., 2009, Actuation mechanism of solid state 
    24. polypyrrole  actuator according to dopant size, Materials Research Innovations, vol.13, no. 3, pp.235-238, 

    ISSN : 1432-8917, Impact factor : 1.723 (SCI), (2009. 9. 1)

  24. Boiko, A. V., Kulik, V. M., Seoudi, B., Chun, H. H. and Lee, I., 2010, Measurement method of complex viscoelastic 
    25. material  properties, International Journal of Solids and Structures, vol. 47, no. 3-4, pp. 374-382, ISSN : 0020-7683, 

    Impact factor : 1.677 (SCI), (2010.2.1)

  25. Kim, Y-H., Chung, W-S., Chun, H. H., Lee, I., Kim, Y-H., Kim, D-H., Park, H., 2010, The Effect of Ball Milling on the pH of 
    26. Mg-Based Metals, Oxides and Zn in Aqueous Media, Metals and Materials International, vol. 16, no. 2, pp.253-258, 

    ISSN : 1598-9623, Impact factor : 1.199 (SCI), (2010.4.26)

  26. Jo, N. J., Lim, D. H., Bark, G. -M., Chun, H. H., Lee, I., Park, H., 2010, Polyurethane-based Actuators with Various 
    27. Polyols,  Journal of Materials Science and Technology, vol. 26, no. 8, pp. 763-768, ISSN : 1005-0302, Impact factor : 0.759 

    (SCIE), (2010.8.23.)

  27. Babenko, V. V., Chun, H. H. and Lee, I., 2010, Coherent vortical structures and methods of their control for drag 
    28. reduction  of bodies, Journal of Hydrodynamics, vol. 22, iss. 5, suppl. 1, pp. 45-50, ISSN : 1001-6058, Impact factor : 0.776 (SCIE), 

    (2010.10.1.)

  28. Lee, D-K., Chung, W-S., Kim, Y-H., Lee, I., Chun, H-H. and Park, H., 2010, The pH Effect for Rare Earth Metals Nd, Pr 
    29. and  Y in Aqueous Solution Dissolved Mg, Zn and Al, Metals and Materials International, vol. 16, no. 5, pp. 833-836, 

    ISSN : 1598-9623, Impact factor : 1.199 (SCI), (2010.10.26)

  29. Jo, N. J., Lim, H-O., Park, M-Y., Park, H., Lee, I. and Chun, H. H., 2011, The effect of carbon filler type on actuation 
    30. behavior of conducting polymer actuator, Functional Materials Letters, vol. 4, no. 1, pp.75-78, ISSN : 1793-6047, 

    Impact factor : 0.724 (SCIE), (2011.3.1)

  30. Kulik, V. M., Boiko A. V., Bardakhanov, S. P., Park, H., Chun, H. H. and Lee, I. , 2011, Viscoelastic properties of silicone 
    31. rubber with admixture of SiO2 nanoparticles, Materials Science and Engineering: A, vol. 528, no. 18, pp.5729-5732, 

    ISSN : 0921-5093, Impact factor : 2.003 (SCI), (2011.7.15)

  31. Park, H., An, N. H., Hutchins, N., Choi, K-S., Chun, H. H. and Lee, I., 2011, Experimental Investigation on the Drag 
    32. Reducing Efficiency of the Outer-layer Vertical Blades, Journal of Marine Science and Technology, vol. 16, no. 4, 

    pp.390-401, ISSN : 0948-4280, Impact factor : 0.547 (SCIE), (2011.12.1)

  32. Boiko, A. V., Kulik, V. M., Chun, H. H. and Lee, I., 2011, Verification of drag-reduction capabilities of stiff compliant 
    33. coatings in air flow at moderate speeds, International Journal of Naval Architecture and Ocean Engineering, vol. 3, no. 4, 

    pp.242-253, ISSN : 2092-6782, Impact factor : 0.231 (SCIE), (2011. 12. 30)

  33. Jo, N.-J., Kim, D. W., Kang, T. W., Park, H., Lee, I. and Chun, H. H., 2012, The Effect of Hydrophilic Components of Zinc 
    34. based Copolymer on Its Self Polishing Behavior, Journal of Applied Mechanics and Materials, vol. 217-219, pp 652~655, 

    ISSN : 1660-9336, (2012. 08. 01)

  34. Chun, H. H., Kim, M. C., Lee, I., Kim, K., Lee, J. K. and Jung, K. H., 2012, Experimental investigation on stern-boat 
    35. deployment system and operability for Korean coast guard ship, International Journal of Naval Architecture and Ocean 

    Engineering, vol. 4, no. 4, pp.488-503, ISSN : 2092-6782, Impact factor : 0.356 (SCIE), (2012. 12. 30)

  35. Kim, Y. W., Lee, J. M., Lee, I., Lee, S. H. and Ko, J. S., 2013, Skin Friction Reduction in Tubes with Hydrophobically 
    36. Structured Surfaces, International Journal of Precision Engineering and Manufacturing, vol. 14, no. 2, pp.299-306,

    ISSN : 2234-7593, Impact factor : 1.585 (SCIE), (2013. 2. 1)

  36. Sridhar, V., Lee, I., Chun, H. H. and Park, H., 2013, Graphene Reinforced Biodegradable Poly 
    37. (3-hydroxybutyrate-co-4- hydroxybutyrate) Nano-composites, Express Polymer Letters, vol. 7, no. 4, pp.320-328, ISSN : 1788-618X, 

    Impact factor : 2.953 (SCIE), (2013. 4. 1)

  37. Rahman, M. M., Kim, H. D., Chun, H. H., Lee, I. and Park, H., 2013, Properties of Waterborne Polyurethane (WBPU) 
    38. Coatings: Effect of Alkyl Chain Length of Tertiary Amines of Carboxylic Acid Salt Groups, Fibers and Polymers, vol. 14, 

    no. 6, pp.886-894, ISSN : 1229-9197, Impact factor : 1.113 (SCIE), (2013. 6. 1)

  38. Jung, J. H., Yoon, H. S., Chun, H. H., Lee, I. and Park, H., 2013, Numerical simulation of wave interacting with a free 
    39. rolling body, International Journal of Naval Architecture and Ocean Engineering, vol. 5, no. 3, pp.333-347, 

    ISSN : 2092-6782, Impact factor : 0.216 (SCIE), (2013. 9. 1)

  39. Vadahanambi, S., Lee, I., Yoon, H-S., Chun, H-H. and Park, H., 2013, "Microwave synthesis of three dimensional 
    40. graphene-based shell-plate hybrid nanostructures", Carbon, vol. 61, pp.633-639, ISSN : 0008-6223, 

    Impact factor : 6.160 (SCI), (2013. 9. 1)

  40. Rahman, M. M., Lee, I., Chun, H. H., Kim, H. D. and Park, H., 2014, Properties of Waterborne Polyurethane-Fluorinated 
    41. Marine Coatings: The Effect of Different Types of Diisocyanates and Tetrafluorobutanediol Chain Extender Content, 

    Journal of Applied Polymer Science, vol. 131, no. 4, pp.39905 1-7, ISSN : 0021-8995, Impact factor : 1.768 (SCI), 

    (2014. 2. 15)

  41. Park, T., Sung, Y., Kim, T., Lee, I., Choi, G. and Kim D., 2014, Effect of static mixer geometry on flow mixing and 
    42. pressure  drop in marine SCR applications, International Journal of Naval Architecture and Ocean Engineering, vol. 6, no. 1, 

    pp.27-38, ISSN : 2092-6782, Impact factor : 0.384 (SCIE), (2014. 3. 1)

  42. An, N. H., Ryu, S. H., Chun, H. H. and Lee, I., 2014, An experimental assessment of resistance reduction and wake 
    43. modification of a KVLCC model by using outer-layer vertical blades, International Journal of Naval Architecture and 

    Ocean Engineering, vol. 6, no. 1, pp.151-161, ISSN : 2092-6782, Impact factor : 0.384 (SCIE), (2014. 3. 1)

  43. Kwon, B. H., Kim, H. H., Jeon, H. J., Kim, M. C., Lee, I., Chun, S. and Go, J. S., 2014, Experimental study on the reduction 
    44. of skin frictional drag in pipe flow by using convex air bubbles, Experiments in Fluids, vol. 55, article 1722, 

    ISSN: 0723-4864, Impact factor : 1.670(SCI), (2014. 4. 16)

  44. Yang, J. W., Park, H., Chun, H. H., Ceccio, S. L., Perlin, M. and Lee, I., 2014, Development and performance at high 
    45. Reynolds number of a skin-friction reducing marine paint using polymer additives, Ocean Engineering, vol. 84, 

    pp.183-193, ISSN : 0029-8018, Impact factor : 1.351 (SCI), (2014. 7. 1)

  45. Kim, B-W., Kang, T-W., Park, H., Lee, I., Chun, H. H. and Jo, N-J., 2014, Self-Polishing Behavior of Zinc-Based 
    46. Copolymer with Different Monomer Composition, Macromolecular Research, vol. 22, no. 9, pp. 978-982, 

    ISSN : 1598-5032, Impact factor : 1.597 (SCI), (2014. 9. 1)

  46. Park, S. H., An, N. H., Yoon, H. S., Park, H., Chun, H. H. and Lee, I., 2014, Time Resolved PIV Investigation on the Skin 
    47. Friction Reduction Mechanism of Outer-layer Vertical Blades Array, Advances in Mechanical Engineering, vol. 7, no. 2, 

    Article ID 901421, ISSN : 1687-8132, Impact factor : 0.575 (SCIE), (2014. 10. 30)

  47. Kim, D-H., Jung, M-Y., Park, H., Lee, I., Chun, H-H. and Jo, N-J., 2015, Antifouling Paint Resin Based on Polyurethane 
    48. Matrix with Quaternary Ammonium Salt, Polymer(Korea), vol. 39, no. 1, pp.122-129, (in Korean) ISSN : 0379-153X, 

    Impact factor : 0.388 (SCIE), (2015. 1. 1)

  48. Hong, S. P., Lee, I., Park, S. H., Lee, C., Chun, H. H. and Lim H. C., 2015, An experimental study of the effect of mooring 
    49. systems on the dynamics of a SPAR buoy-type floating offshore wind turbine, International Journal of Naval Architecture 

    and Ocean Engineering, vol. 7, no. 3, pp.559-579, ISSN : 2092-6782, Impact factor : 0.722 (SCIE), (2015. 6. 1)

  49. Sridah, V., Lee, I., Chun, H. H. and Park, H., 2015, Microwave synthesis of nitrogen-doped carbon nanotubes anchored 
    50. on graphene substrates, Carbon, vol. 87, pp.186-192, ISSN : 0008-6223, Impact factor : 6.198 (SCI), (2015. 6. 1)
  50. Sridah, V., Lee, I., Chun, H. H. and Park, H., 2015, Hydroquinone as a single precursor for concurrent reduction and 
    51. growth of carbon nanotubes on graphene oxide, RSC Advances, vol. 5, no. 84, pp.68270-68275, ISSN : 2046-2069, 

    Impact factor : 3.289 (SCIE), (2015. 8. 1)

  51. Kim, S-M., Han, S. S., Kim, A. Y., Choi, B-J., Paik, H-J., Lee, I., Park, H., Chun, H. H., Cho, Y. and Hwang D-H., 2015, 
    52. Anti-biofouling Effect of PEG-grafted Block Copolymer Synthesized by RAFT Polymerization, Journal of Nanoscience 

    and Nanotechnology, vol. 15, no. 10, pp.7866-7870, ISSN : 1533-4880, Impact factor : 1.338 (SCI), (2015. 10. 1)

  52. Kim, S-M., Kim, A. Y., Park, H., Chun, H. H., Lee, I., Cho, Y. and Hwang D-H., 2015, Amphiphilic Random Copolymers 
    53. Consisting of Styrene, EGMA, and HEMA for Anti-Biofouling Coatings, Molecular Crystals and Liquid Crystals, vol. 622, 

    pp.151-157, ISSN : 1542-1406, Impact factor : 0.532 (SCI), (2015. 12. 16)

  53. Lee, J. H., Kang, S. G., Kim, I. T., Kwon, S., Lee, I. and Lee, S. G., 2016, Adsorption Mechanisms of Lithium Oxides 
    54. (LixO2) on N-doped Graphene: A Density Functional Theory Study with Implications for Lithium-Air Batteries, 

    Theoretical Chemistry Accounts, vol. 135, no. 3, article # 50, ISSN : 1432-881X, Impact factor : 1.890 (SCI), 

    (2016. 3. 15)

  54. Uwitonze, H., Hwang, K. S. and Lee, I., 2016, A new design method and operation of fully thermally coupled distillation 
    55. column, Chemical Engineering and Processing, vol. 102, pp.47-58, ISSN : 0255-2701, Impact factor : 2.234 (SCI), 

    (2016. 4. 1)

  55. Jo, J. H., Ko, H. C., Kim, B. W., Park, H., Lee, I., Chun, H. H. and Jo, N-J., 2016, Micellar core-shell-type acrylic-
    56. polyurethane hybrid materials with self-polishing property, Composite Interfaces, vol. 23, no. 8, pp.797-805, 

    ISSN : 0927-6440, Impact factor : 1.083 (SCI), (2016. 4. 1)

  56. Ahn, E. Y., Seo, Y. S., Cho, J. H., Lee, I., Hwang, J., Jeen, H., 2016, Epitaxial growth and metallicity of rutile MoO2 thin 
    57. film,  RSC Advances, vol. 6, pp. 60704-60708, ISSN : 2046-2069, Impact factor : 3.108 (SCIE), (2016. 6. 17)
  57. Uwitonze, H., Lee, I. and Hwang, K. S., 2016, Alternatives of integrated processes for coproduction of LNG and NGLs 
    58. recovery, Chemical Engineering and Processing, vol. 107, pp. 157-167, ISSN : 0255-2701, Impact factor : 2.234 

    (SCI), (2016. 9. 1)

  58. Kong, H., Ahn, E. Y., Ryu, S., Kim, J. W., Cho, J. H., Park, S., Kim, D., Jeen, G. S., Lee, I., Jeen, H., 2016, Growth and 
    59. physical properties of large MoO3 single crystals, Journal of Materials Science, vol. 51, no. 19, pp. 8928-8934, 

    ISSN : 0022-2461, Impact factor : 2.599 (SCI), (2016. 10. 1)

  59. Kim, S-M., Kim, A. Y., Lee, I., Park, H., and Hwang D-H., 2016, Synthesis and Characterization of Self-polishing 
    60. Copolymers Containing a New Zinc Acrylate Monomer, Journal of Nanoscience and Nanotechnology, vol. 16, no. 10, 

    pp.10903-10907, ISSN : 1533-4880, Impact factor : 1.483 (SCI), (2016. 10. 1)

  60. Choi, B. S., Park, J. C., Hwang, S. H., Kim J. K., Shin, S. C., Lee, I., Ryu, J. H. and Cho, H., 2016, Etch selectivities of 
    61. mask  materials for micromachining of ultrananocrystalline diamond film, Journal of Ceramic Processing Research, vol. 17, 

    no. 11, pp.1123-1126, ISSN : 1229-9162, Impact factor : 0.320 (SCIE), (2016. 11. 1)

  61. Ahn, E. Y., Lee, J. H., Koh, Y. Y., Lee, J., Park, B-G., Kim, J-Y., Lee, I., Lee, C-W., Jeen, H., 2017, Low Temperature 
    62. Nanoscale Oxygen-Ion Intercalation Into Epitaxial MoO2 Thin Films, Journal of Physical Chemistry, Part. C, vol. 121, 

    pp.3410-3415, ISSN : 1932-7447, Impact factor : 4.536 (SCI), (2017. 1. 24)

  62. Gangaraju, D., Vadahanambi, S., Lee, I. and Park, H., 2017, Graphene – carbon nanotube – Mn3O4 mesoporous nano-
    63. alloys as high capacity anodes for lithium-ion batteries, Journal of Alloys and Compounds, vol. 699, pp.106-111, 

    ISSN : 0925-8388, Impact factor : 3.133 (SCI), (2017. 3. 30)

  63. Jo, S. H., Lee, I., Park, H. and Lee, H., 2017, Experimental evidence and mechanism of the oxygen storage capacity in 
    64. MnO2-Ce(1-x)ZrxO2/TiO2 catalyst for low-temperature SCR, Ceramics International, vol. 43, no. 6, pp.5182-5188, 

    ISSN : 0272-8842, Impact factor : 2.986 (SCI), (2017. 4. 15)

  64. Heo, Y. A. and Lee, I., 2017, Parametric Generation of Explosion Scenarios for Quantitative Risk Assessment of Gas 
    65. Explosion in Offshore Plants, Process Safety Progress, vol. 36, no. 2, pp.139-149, ISSN : 1066-8527, 

    Impact factor : 0.812 (SCIE), (2017. 6. 1)

  65. Uwitonze, H., Hwang, K. S. and Lee, I., 2017, Modelling and improving natural gas condensate process with stripping and 
    66. heat integration, Chemical Engineering and Processing, vol. 118, pp.71-77, ISSN : 0255-2701, Impact factor : 2.234 

    (SCI), (2017. 8. 1)

  66. Seo, H. S., Jang, H. Y. and Lee, I., 2017, Experimental Investigation of Salt Fog Effect on the CFRP Laminates, Advanced 
    67. Composite Materials, vol. 26, no. 4, pp.321-334, ISSN : 0924-3046, Impact factor : 1.407 (SCIE), (2017. 8. 1)
  67. Jang, H., Seo, H. and Lee, I., 2017, Effectiveness of CFRP rudder aspect ratio for scale model catamaran racing yacht 
    68. test, Journal of Mechanical Science and Technology, vol. 31, no. 9, pp.4109-4117, ISSN : 1738-494X, 

    Impact factor : 1.128 (SCIE), (2017. 9. 1)

  68. Yu, J. W., Lee, C. M., Lee, I. and Choi, J. E., 2017, Bow hull-form optimization in waves of a 66,000 DWT bulk carrier, 
    69. International Journal of Naval Architecture and Ocean Engineering, vol. 9, pp.499-508, ISSN : 2092-6782, 

    Impact factor : 0.606 (SCIE), (2017. 9. 1)

  69. Yu, J. W., Lee, C. M., Choi, J. E. and Lee, I., 2017, Effect of ship motions on added resistance in regular head waves of 
    70. KVLCC2, Ocean Engineering, vol. 146, pp.375-387, ISSN : 0029-8018, Impact factor : 1.894 (SCI), (2017. 12. 1)
  70. Park, S. H. and Lee, I., 2017, Optimization of Drag Reduction Effect of Air Lubrication for a Tanker Model, International 
    71. Journal of Naval Architecture and Ocean Engineering, published online, ISSN : 2092-6782, Impact factor : 0.606 (SCIE)
  71. Lee, C. M., Yu, J-W., Choi, J-E., and Lee, I., 2017, Effect of bow hull forms on the resistance performance in calm water 
    72. and waves for 66k DWT bulk carrier, International Journal of Naval Architecture and Ocean Engineering, revised, 

    ISSN : 2092-6782, Impact factor : 0.606 (SCIE)

  72. Lee, C. M., Park, S-C., Yu, J-W., Choi, J-E., and Lee, I., 2017, Effects of diffraction in regular head waves on added 
    73. resistance and wake using CFD, International Journal of Naval Architecture and Ocean Engineering, submitted, 

    ISSN : 2092-6782, Impact factor : 0.606 (SCIE)

  73. Jang, H. Y., Seo, H. S., Lee, I. and Youn, D. H., 2017, Optimization of the Spudcan Shape of Jack-up Platform for 
    74. Offshore Wind Turbine Substructure through Model Basin Test, International Journal of Naval Architecture and Ocean 

    Engineering, submitted, ISSN : 2092-6782, Impact factor : 0.606 (SCIE)

  74. Lee, J., Ahn, E., Seo, Y-S., Kim, Y., Jeon T-Y., Cho, J., Lee, I. and Jeen, H., 2018, Redox-Driven Nanoscale Topotactic 
    75. Transformations in Epitaxial SrFe 0.8 Co 0.2 O 3 − x under Atmospheric Pressure, Physical Review Applied, vol. 10, 054035-1-7, 

    ISSN: 2331-7019, Impact factor: 4.782 (SCIE), (2018. 11. 15)

  75. Ahn, E., Min, T., Lee, J., Lee, I., Kim, Y. and Jeen, H., 2018, Role of surface oxidation for thickness-driven insulator-to-
    76. metal transition in epitaxial MoO 2 films, Applied Surface Science, vol. 459, pp.92-97, ISSN : 0169-4332, Impact factor : 4.439 

    (SCI), (2018. 11. 30)

  76. Kim, G., Zhang Y-Q., Min, T., Suh, H., Jang, J. H., Kong, H., Lee, J., Lee, J., Jeon, T-Y., Lee, I., Cho, J., Ota, H. and 
    77. Jeen, H., 2018, Extremely Light Carrier-Effective Mass in a Distorted Simple Metal Oxide, Advanced Electronic Materials, 

    in press, ISSN : 2199-160X, Impact factor : 5.466 (SCIE), (2018. 12. 08)

  77. Jeon, M., Noh, Y., Shin, Y., Lim, O-K., Lee, I. and Cho, D., 2018, Prediction of Ship’s Fuel Consumption Using Artificial Neural 
    78. Network, Journal of Mechanical Science and Technology, in press, ISSN : 1738-494X, Impact factor : 1.194 (SCIE)
  78. Lee, C. M., Yu, J-W., Choi, J-E., and Lee, I., 2017, Effect of bow hull forms on the resistance performance in calm water and 
    79. waves for 66k DWT bulk carrier , International Journal of Naval Architecture and Ocean Engineering, revised, ISSN : 2092-6782, 

    Impact factor : 0.930 (SCIE)

  79. Lee, C. M., Park, S-C., Yu, J-W., Choi, J-E., and Lee, I., 2018, Effects of diffraction in regular head waves on added resistance 
    80. and wake using CFD, International Journal of Naval Architecture and Ocean Engineering, revised, ISSN : 2092-6782, 

    Impact factor : 0.930 (SCIE)

  80. Lee, C. M., Paik, K. J., Kim, E, and Lee, I., 2018, Study on the pivoted circular motion acting on the tandem cylinder using CFD, 
    81. Journal of Fluids and Structures , submitted, ISSN : 0889-9746, Impact factor : 2.434 (SCI)
  81. Lee, C. M., Seo, J-H., Yu, J-W., Choi, J-E., and Lee, I., 2018, Prediction of power increase and propulsive performances in 
    82. regular head short waves of KVLCC2 using CFD, International Journal of Naval Architecture and Ocean Engineering, submitted,  

    ISSN : 2092-6782, Impact factor : 0.930 (SCIE)

  82. Jang, H. Y., Seo, H. S., Lee, I. and Youn, D. H., 2018, Optimization of the Spudcan Shape of Jack-up Platform for Offshore 
    83. Wind Turbine Substructure through Model Basin Test , International Journal of Naval Architecture and Ocean Engineering, 

    submitted, ISSN : 2092-6782, Impact factor : 0.930 (SCIE)

  83. Kulik, V. M., Boiko, A. V. and Lee, I., 2019, Using two-layer compliant coatings to control turbulent boundary layer, 
    84. Thermophysics and Aeromechanics, vol. 26, no. 1, pp.47-57, ISSN: 0869-8643, Impact factor: 0.423 (SCIE), (2019. 1. 1)
  84. Lee, C. M., Yu, J-W., Choi, J-E., and Lee, I., 2019, Effect of bow hull forms on the resistance performance in calm water and waves 
    85. for 66k DWT bulk carrier , International Journal of Naval Architecture and Ocean Engineering, vol.11, no. 2, pp.723-735,  

    ISSN: 2092-6782, Impact factor: 2.242 (SCIE), (2019. 7. 1)

  85. Lee, C. M., Seo, J-H., Yu, J-W., Choi, J-E., and Lee, I., 2019, Comparative study of prediction methods of power increase and 
    86. propulsive performances in regular head short waves of KVLCC2 using CFD , International Journal of Naval Architecture and Ocean 

    Engineering, vol.11, no. 2, pp.883-898, ISSN: 2092-6782, Impact factor: 2.242 (SCIE), (2019. 7. 1)

  86. Ha, J-W., Kim, S-M., Park, H. J., Lee, I., Park, H. and Hwang, D-H., 2019, Synthesis of Novel Polyacrylates Containing 
    87. Cyclotetrasiloxane for Fouling-Release Coating Applications, Journal of Nanoscience and Nanotechnology, vol. 19, no. 8, 

    pp.4686-4690, ISSN: 1533-4880, Impact factor: 1.134 (SCI), (2019. 8. 1)

  87. Kwon, S. H., Lee, I., Park, H. and Lee S. G., 2020, Decomposition mechanisms of self-polishing copolymers for antifouling 
    88. coating materials through first-principles approach, Progress in Organic Coatings, vol. 138, article 105406, ISSN: 0300-9440, 

    Impact factor: 5.161 (SCI), (2020. 1. 1)

  88. Uwitonze, H., Hwang, K. S. and Lee, I., 2020, Improving NGL recovery process with dividing-wall column for offshore applications, 
    89. Chemical Engineering and Processing, vol. 147, Article 107747, ISSN: 0255-2701, Impact factor: 4.237 (SCI), (2020. 1. 1)
  89. Abebe, M., Shin, Y., Noh, Y., Lee, S. and Lee, I., 2020, Machine Learning Approaches for Ship Speed Prediction towards 
    90. Energy Efficient Shipping, Applied Sciences-Basel, vol. 10, iss. 7, article 2325, ISSN: 2076-3417, Impact factor: 2.679 

    (SCIE), (2020. 4. 1) 

  90. Shin, Y., Abebe, M., Noh, Y., Lee, S., Lee, I., Kim, D., Bae, J. and Kim K. C., 2020, Near-Optimal Weather Routing by 
    91. Using  Improved A* Algorithm, Applied Sciences-Basel, vol. 10, iss. 17, article 6010, ISSN: 2076-3417, 

    Impact factor: 2.679 (SCIE), (2020. 9. 3) 

  91. Sridhar, V., Lee, I., Jung, K. H. and Park, H., 2020, Metal Organic Framework Derived MnO2-Carbon Nanotubes for Efficient 
    92. Oxygen Reduction Reaction and Arsenic Removal from Contaminated Water, Nanomaterials, vol. 10, iss. 9, article 1895, 

    ISSN: 2079-4991, Impact factor: 5.076 (SCIE), (2020. 9. 22) 

  92. Seo, J-H., Lee, C-M., Yu, J-W., Choi, J-E. and Lee, I., 2020, Power increase and propulsive characteristics in regular head 
    93. waves of KVLCC2 using model tests, Ocean Engineering, vol. 216, article 108058, ISSN: 0029-8018, Impact factor: 3.795 (SCI), 

    (2020. 11. 15)

  93. Cho, Y., Jeon, K. H., Lee, S. B., Park, H. and Lee, I., 2021, Evaluation of In-service Speed Performance Improvement by 
    94. means of FDR-AF (Frictional Drag Reducing Anti-Fouling) marine coating based on ISO19030 standard, 

    Scientific Reports, vol. 11, article no. 1062, ISSN: 2045-2322, Impact factor: 4.379 (SCI), (2021. 1. 13)

  94. Yu, J-W., Lee, C-M., Seo, J-H., Chun, H-H., Choi, J-E. and Lee, I., 2021, Comparative study on the prediction methods of 
    95. speed-power-rpm in regular head waves of KVLCC2 using model tests, International Journal of Naval Architecture and Ocean 

    Engineering, vol. 13, pp. 24-34, ISSN: 2092-6782, Impact factor: 2.473 (SCIE). (2021. 1. 16)

  95. Jeon, M., Noh, Y., Jeon, K., Lee, S. and Lee, I., 2021, Data gap analysis of ship and maritime data using meta learning, 
    96. Applied Soft Computing, vol. 101, Article 107048, ISSN: 1568-4946, Impact factor: 6.725 (SCIE), (2021. 3. 1)
  96. Lee, C-M., Paik, K-J., Kim, E, S. and Lee, I., 2021, A Fluid-Structure Interaction simulation on the wake-induced vibration of 
    97. tandem cylinders with pivoted rotational motion, Physics of Fluids , vol. 33, no. 4, 045107, ISSN: 1070-6631, 

    Impact factor: 3.521 (SCI), (2021. 4. 5)

  97. Jeong, C-S., Kim, G., Lee, I. and Jin, S., 2021, Empirical modeling of 2-degree-of-freedom azimuth underwater thruster 
    98. using a signal compression method, Applied Sciences-Basel, vol. 11, 3517, ISSN: 2076-3417 , Impact factor: 2.679 (SCIE), 

    (2021. 4. 14)

  98. Chun, H-H., Lee, C-M., Lee, I. and Choi, J-E., 2021, Improvement of prediction methods of power increase in regular head 
    99. waves  using calm-water and resistance tests in waves, International Journal of Naval Architecture and Ocean Engineering, vol. 13, 

    pp. 278-291, ISSN: 2092-6782, Impact factor: 2.473 (SCIE), (2021. 4. 26)

  99. Park, T., Kim, B., Hwang, G., Kang, Y., Lee, I. and Ahn, Y., 2021, Improving Comfort and Air Conditioner Performance by 
    100. Optimizing Controllers under Actual Usage Conditions, Applied Sciences-Basel, vol. 11, iss. 11, article 4818, 

    ISSN: 2076-3417, Impact factor: 2.679 (SCIE), (2021. 5. 24)

  100. Yu, J-W., Lee, M. K., Kim, Y-I., Suh, S-B. and Lee, I., 2021, An optimization study on the hull form and stern appendage 
    101. for improving resistance performance of a coastal fishing vessel, Applied Sciences-Basel, vol. 11, iss. 13, article 6124 , 

    ISSN: 2076-3417, Impact factor: 2.679 (SCIE), (2021. 7. 8)

  101. Park, J., Kim, H., Lee, D. and Lee, I., 2021, Mission planning and performance verification of an unmanned surface 
    102. vehicle  using a genetic algorithm, International Journal of Naval Architecture and Ocean Engineering, vol. 13, pp. 575-584,  

    ISSN: 2092-6782, Impact factor: 2.473 (SCIE), (2021. 7. 19)

  102. Uwitonze, H., Lee, I., Suh, S.-B. and Lee, I., 2021, CFD study of oscillatory motion effect on liquid flow distribution into structured 
    103. packed divided wall column , Chemical Engineering and Processing, vol. 165, Article 108429, ISSN: 0255-2701, 

    Impact factor: 4.237 (SCI), (2021. 8. 1)

  103. Abebe, M., Noh, Y., Seo, C., Kim, D. and Lee., I., 2021, Developing a Ship Collision Risk Index estimation model based 
    104. on  Dempster-Shafer theory, Applied Ocean Research, vol. 113, Article 102735, ISSN: 0141-1187, 

    Impact factor: 2.979 (SCI), (2021. 8. 1)

  104. Lee, C-M., Jung, W-Y., Kim, E, S., Paik, K-J., Suh, S-B. and Lee, I., 2021, Experimental investigation of the wake-
    105. induced  pendulum motion of tandem cylinders , Journal of Fluids and Structures, submitted , ISSN: 0889-9746, 

    Impact factor: 2.917 (SCI)

  105. Yu, J-W., Kim, S-G., Jeong, W, Kim, Y. I., Choi, J-E. and Lee, I., 2021, Prediction of resistance and propulsion performances 
using calm-water and resistance tests in regular head waves of a 1,800 TEU container ship, International Journal of Naval 

Architecture and Ocean Engineering, submitted ISSN: 2092-6782, Impact factor: 2.473 (SCIE)